Nicotine salt liquids buying guide for Scotland (800 mAh)

Nicotine salt liquids advice for Scotland, covering palette, what to look for and where the trade-offs actually sit.

Local availability in Scotland shapes the practical answer more than the marketing does. Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.

Budget matters in Scotland, but with nicotine salt liquids the cheapest option is rarely the one that lasts. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.

The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense. In Scotland, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself.

What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber. The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.

Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. For value hunters, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense.

Two things to check before ordering: the Micro-USB socket on the base and whether the 0.6 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 150 and recharges over Micro-USB. We would pair the RELX Pro with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.

The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly.

Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 932 full puffs from a charge at 20 mg/ml, based on average session length in our testing. The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly.

Specifications

Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.

Flavour and performance notes

A representative profile is Pineapple Ice Cream: creamy, sweet, described as dairy-style pineapple dessert. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.

Practical considerations in Scotland

Availability in Scotland is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.

If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.